Designed for filling
four drums on a pallet or one tote on a pallet.
More than one incompatible product may be filled
on this filler by adding additional lances (up to a total
of three lances)
The pneumatic-powered lance carriage with x-y movement
can reach four drums or one tote. Lance movement is controlled
via pneumatic push buttons on the operator panel.
Fills 55 gallon drums in 60 seconds or less
SPECIFICATIONS
| Control Power: |
120 volts ± 10%, 60 Hz at 3 amps |
| Pneumatic Requirements: |
Pressure - 90-125 PSIG filtered (6-8.5 Bars)
Demand - 16.4 SCFM (464 cubic liters per minute)
Usage/Cycle - 3.0 standard cubic feet (85 cubic liters) |
| Fill Time: |
60 seconds per 55 gallon drum (208L) |
| Product Delivery: |
110 GPM at 20 PSIG min. with 2" NPT connection
(416 liters per minute at 1.3 Bars) |
| Weighing Accuracy: |
± 3 increments on a 3 sigma basis |
| Operating Temperature: |
32° F - 104° F (O° C - 40° C) at 95%
relative humidity |
| Scale Base: |
Size - 48" x 48" (121 cm x 121 cm)
Gross capacity - 5,000 lb (2,268 kg) |
STANDARD MECHANICAL FEATURES
|
| • Mild Steel blue painted frame |
| • Teflon seats and seals |
| • Mild steel scale base with stainless
steel load cells |
| • 1.9" O.D. (48mm) 316 stainless
steel lance, product valve and piping |
| • Teflon encapsulated Viton O-Ring |
| • 2" NPT female
inlet connection |
| • X-Y lance carriage
to reach four drums on a pallet |
| • Lance actuated drip
pan |
OPTIONAL MECHANICAL FEATURES
|
| • Special diameter lance |
| • Kynar lance assembly |
| • Multiple sized containers |
| • Sanitary lance - 316 stainless
steel with quick disconnect (USDA approved) |
| • Gray, sanitary white or chemical
resistant beige epoxy paint |
| • Pneumatically powered
scale, indexing or exit conveyors |
| • 48" x 48" (121 cm x 121m)
gravity scale conveyor, 8" (20 cm) floor to top of
rollers (conveying surface: 43" W x 48" L) |
| • Purged lance assembly |
| • Fume exhaust hood |
| • Stainless steel scale
base |
| • Stainless steel scale
cover to slip over mild steel base |
OPTIONAL CONTROL FEATURES
|
| • Constant voltage transformer |
| • 80 column dot matric report printer |
| • X-purged NEMA-4 mild steel enclosure,
30" H x 24" W x 12" D with intrinsically
safe barrier strip |
| • NEMA-4 stainless steel enclosure |
|
|
|
